The SYSTEM 35 Modular Synthesiser opens up a world of sonic possibilities with its comprehensive 25-module setup, complete with MIDI-to-CV converter and EURORACK GO case. This complete modular system serves as the perfect entry point for musicians venturing into the captivating realm of modular synthesis, offering everything needed to create complex, evolving soundscapes.
At the heart of this system lie two 921A OSCILLATOR DRIVERS working alongside four 921B VCOs and one 921 VCO, providing five fully-featured voices ready for endless adjustment and tweaking. The dual CP3A-M MIXER modules handle up to four inputs each, allowing you to route signals throughout your patches - send one signal to a delay module while directing another through a step sequencer for intricate, layered compositions.
The included CP35 ATTENUATOR module features four linked attenuators plus two sets of four multiples with reference voltages, giving you precise control over signal levels and distribution. Connect a single signal to the CP35’s first input and watch it cascade to all four outputs, creating up to four variable outputs from one source. Two additional banks of 4-point multiple circuits ensure you can route multiple copies of any input signal exactly where you need them across your modular setup.
- Pre-assembled ”System 35“ modular synthesizer with 25 vintage-sounding modules from the ’70s
- 2x 921A OSCILLATOR DRIVER with 4x 921B VCOs and 1x 921 VCO provide you with 5 fully featured voices
- 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
- 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
- 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
- 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
- 2x CP3A-module allows CV mixing and switching for the VCOs with 1 attenuator
- 2x CP3A-M 4 input mixer with master level, 4 outputs, and 2 sets of 4 multiples
- 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples, and reference voltages
- 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
- 3x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
- 3x 902 VOLTAGE-CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
- 1x BP12 and 3x BP2 blank panels for a total of 18 HP expansion space
- 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig, or S-trig outputs




