Behringer System 15 Complete Modular Synthesizer
BEH-SYSTEM15
$1199
Free Shipping
Anywhere Australia wide*
The SYSTEM 15 Modular Synthesiser opens up a world of sonic exploration with its comprehensive 16-module setup, complete with MIDI-to-CV converter and EURORACK GO case. This complete modular system serves as the perfect entry point for musicians venturing into the captivating realm of modular synthesis, offering everything needed to create complex, evolving soundscapes straight out of the box.
At the heart of this system lies serious oscillator power, featuring a 921A OSCILLATOR DRIVER alongside two 921B VCOs and a 921 VCO. These components provide three fully-featured voices that can be adjusted and tweaked to your heart’s content. The CP3A-M MIXER module handles up to four inputs, allowing you to route signals to various destinations throughout your patch - send one signal to a delay module while directing another through a step sequencer for intricate, layered compositions.
The included CP35 ATTENUATOR module adds significant flexibility with its four linked attenuators, dual sets of four multiples, and reference voltages. Connect a single signal to the CP35’s first input and watch it distribute to all four outputs, giving you up to four variable outputs from one source. Two additional banks of 4-point multiple circuits ensure you can route multiple copies of input signals wherever needed, making complex patching both accessible and enjoyable for hours of creative exploration.
- Pre-assembled ”SYSTEM 15“ modular synthesizer with 16 vintage sounding modules from the ’70s
- 1x 921A OSCILLATOR DRIVER with 2x 921B VCOs and 1x 921 VCO provide you with 3 fully featured voices
- 1x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
- 1x CP35 ATTENUATOR module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
- 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
- 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
- 1x 923 FILTERS module with 6 dB low and high pass filters plus white/pink noise sources
- 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
- 2x 902 VOLTAGE CONTROLLED AMPLIFIERS with 3 summed CV inputs plus dual audio inputs and outputs
- 2x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
- 1x BP56 blank panel allow for expansion space for additional modules such as 960 sequential controller
- 1x BP28 and 1x BP12 blank panels for a total of 96 HP expansion space
- 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
- 1x EURORACK GO case including PSU